Network Devices:
Modem:
- stands for Modulator / Demodulator
- It’s a |OSI layer 1 device.
- Converts digital data into signal suitable for transmission (Modulation). Uses FM AM PM QAM.
- takes the incoming modulated signal and converts it into digital data (Demodulation).
- Implies encoding schemes to reduce errors and improve readability.
- Ensure that the sender and receiver are aligned in timing and frequency
- Handles noise, signal amplification, equalization
- It’s a bridge between your local network and the ISP’s transmission medium.
Router:
- The router allows us to take data from one IP subnet to a different IP subnet.
- It’s an OSI layer 3 device.
- A router uses IP addresses to route the data.
- Routers inside of switches are called “Layer 3 switches”. Having a router inside of a switch doesn’t mean that the switch now does the work of the router, but its a 2in1 device working on Layer 2 using the switch and layer 3 using the router
- Often connect many types of networks (LAN, WAN)
Switch:
- The switches operate on the Data Link layer to be able to forward traffic.
- This device is an OSI layer 2 device.
- Operates mostly in hardware. The hardware in the device is referred to ASIC (Application-specific integrated circuit).
- Some switches may provide Power over Ethernet (PoE).
- Some switches are what’s called a Multilayer switch (include layer 3 functionality)
(more details in the class notes)
Firewall:
- Used for security reasons
- It filter traffic using TCP/UDP port number (Traditional firewall)
- NGFW (next generation firewall) is able to identify applications, so we can set rules if an application is allowed or not into our network.
- Some firewalls can encrypt traffic using VPN (Virtual private network). This functionality lets us have an encrypted tunnel between a firewall in Remote Site A and another one in Remote Site B.
- Most firewalls can be an OSI layer 3 device (Router). Often sits on the ingress(entering)/egress(exiting) of a network. to perform this functionality, many firewalls has a NAT (Network Address Translation) and a Dynamic routing
IDS and IPS:
IDS: Intrusion Detection System
IPS: Intrusion Prevention System
- They look for attacks on your network
- They can Identify, alert (IDS) , and prevent attacks (IPS) from happening on your network
Load balancer:
- Distribute the load across multiple servers
- Invisible to end-user
- Helps maintain Uptime and Availability
- If one server malfunctioned we can easily take it out of the rotation.
- We can manage the load across servers
- Optimize the communication using TCP offloading.
- Can provide the encryption and decryption abilities instead of the serves. (SSL offload)
- Data can be cached on the load balancer. making the connectivity faster
- Can prioritize different types of traffic over others (QoS)
- Certain pages can be stored on different servers making the load balancer switch server based on the page we are showing (Application-centric balancing)
Proxy:
- Sits between the users and the external network. and make the communication on the user’s behalf
- Get the user’s request and send the request on their behalf to then receive the answer to that request and verify if the data doesn’t have some malicious code to send back to the user.
- sometimes useful for caching information, access control, URL filtering, content scanning.
- a proxy can be transparent (bala wj3it ras) OR it can be Explicit meaning the application may need to know how to use the proxy.
NAS vs SAN:
*NAS: Network Attached Storage
SAN: Storage Area Network
NAS:
- connect to a shared storage device across the network
- file-level access (if we want to access information within a file we will need to extract the whole file and send it back into the NAS when done working on it)
SAN:
- Block-level access (change just the blocks that have been modified)
- Very efficient when reading and writing
Access point:
- NOT a wireless router
- Extend the wired network onto the wireless network
- This device is an OSI layer 2 device
Wireless LAN Controller:
- Instead of connecting to each access point to manage them, we use the Wireless LAN controller to manage them all in one place.
- We can deploy new access points.
- Setup performance and security monitoring (alerted if we see anything fishy in any of our access points).
- Configure and deploy changes to all sites.
- Report on access point use
- Its best to use the same manufacturer for AP and wireless LAN controller.