1. Coordinates as Scalars

Definition 1.1 – Standard basis vectors

In the xy-plane there are two special unit vectors:

Key idea – Reading coordinates as scaling instructions

Each coordinate is a scalar that scales a basis vector; the vector is the sum of the scaled basis vectors.

Worked example.

  • stretches to three times its length.
  • flips and stretches it by 2.
  • Adding the two scaled vectors gives the vector.

Definition 1.2 – Basis (informal)

and together form the basis of the standard coordinate system: they are the things that the coordinates actually scale.


2. Choosing a Different Basis

Nothing forces us to use and . Pick two other vectors — e.g. one pointing up-right and one pointing down-right — and use pairs of scalars to scale them instead.

  • For most such pairs, every 2D vector can still be reached.
  • This gives a valid but different translation between number pairs and arrows.

⚠️ Pitfall: Whenever you write a vector as numbers, you have implicitly chosen a basis. The same arrow has different coordinates in different bases (full treatment in Chapter 13).


3. Linear Combinations

Definition 3.1 – Linear combination

Scaling vectors and adding the results:

is a linear combination of and .

Why “linear”?

Not the etymology, but a useful picture: fix one scalar and let the other vary freely — the tip of traces a straight line.


4. Span

Definition 4.1 – Span

The span of a set of vectors is the set of all their linear combinations — everything reachable using only vector addition and scalar multiplication.

Span of two vectors in 2D

SituationSpan
point in different directions (most pairs)All of the 2D plane
line up (one is a multiple of the other)A single line through the origin
Just the origin

Vectors as points

  • A single vector → think of it as an arrow.
  • A collection of vectors → think of each as the point at its tip (tail still at the origin).

So “all vectors on a line” = the line itself, and “all 2D vectors” = the whole plane.

Span in 3D

VectorsTypical span
Two non-parallel 3D vectorsA flat plane through the origin
Add a third vector on that planeStill the same plane (no new reach)
Add a third vector off that planeAll of 3D space

Picture: as you scale the third vector, it slides the plane spanned by the first two through all of space — three free scalars give access to three dimensions.

Worked example. , span the xy-plane. Adding changes nothing; adding instead unlocks all of .


5. Linear Dependence and Independence

Definition 5.1 – Linearly dependent

A set of vectors is linearly dependent if at least one can be removed without shrinking the span — equivalently, one of them is a linear combination of the others:

Definition 5.2 – Linearly independent

Each vector adds a new dimension to the span; none is a combination of the others:

DependentIndependent
Redundant vector?YesNo
Two 2D vectorsCollinearNot collinear
Three 3D vectorsAll lie in one plane (or line)Span all of 3D

⚠️ Pitfall: Any set containing is dependent — the zero vector never adds anything to the span.


6. Basis (Technical Definition)

Definition 6.1 – Basis of a space

A basis of a space is a set of linearly independent vectors that span that space.

Why it makes sense:

  • Spans the space → every vector can be written as a combination (coordinates exist).
  • Independent → no redundancy, so those coordinates are unique.

Exercises: Explain in your own words why “linearly independent + spans the space” is the right definition of a basis; then decide whether form a basis of (practice set on the lesson page).