cisco_packet_tracer class_notes

Useful CLI Commands:

Misc.:

?                                 --command help

[command] ?                       --see options

show clock                        --show time and date

clock set <hh:mm:ss dd mmm yyyy>  --set time and date (mmm = jan feb ...)[in EXEC mode]

Debugging:

show run               --show running config

show start             --show startup config

show ip inteface brief --show status of all ports/intefaces

show flash             --show content of the flash memmory (NVRAM)

show ip route          --show routing table

show ip protocols      --show active IPv4 routing protocols

debug ip rip           --show live RIP activity
undebug all            --stop the debigging process

show ospf neighbor     --show OSPF neighbors a router has formed adjacencies with.

show ospf database     --show the topology information OSPF uses to compute routes

show ospf interface    --show OSPF settings and status per interface

IP route codes:

CodeMeaningSource
CConnectedDirectly connected network
LLocalRouter’s own interface IP
SStaticManually configured route
RRIPLearned via RIP
OOSPFLearned via OSPF
DEIGRPLearned via EIGRP
BBGPLearned via BGP
------------------------------------------------
*DefaultCandidate default route
O IAInter-AreaInter-Area route
O E1ExternalExternal type 1
O E2ExternalExternal type 2

Configuration:

enter config mode:

conf t

change device host name:

hostname X1

set an encrypted secret to enter EXEC mode:

enable secret xxx

enable pass encryption:

service password-encryption

set a message of the day:

banner motd # <message> # 

save the running config to startup config:

copy run start 

Interface config:

console config:

line console 0       --enter console config
password xxx         --set console pass 
login                --to enforce authentication
logging synchronous  --enable logging synchronous

vty config:

line vty 0 4            --allows 5 remote users (0 to 4)
password cisco          --set password for remote
login                   --enable password to loggin
transport input ssh     --restrict remote access to SSH only

port config:

interaface fa0/x
ip address <IP address> <subnet mask>
desciption <link to x>
no shutdown

vlan config:

inteface vlan x
ip address <IP address> <subnet mask>
no shutdown

serial port config:

interaface s0/0/x
ip address <IP address> <subnet mask>
desciption <link to x>
clock rate 128000
no shutdown

Static Routing:

add static:

ip route <network ID> <subnet mask> <interface / IP address>

remove static:

no ip route <network ID> <subnet mask> <inteface /  IP address>

default route static:

ip route 0.0.0.0 0.0.0.0 <inteface / IP address>

RIP Routing:

router rip
version 2
passive-interface g0/x  --stops RIP from sending out of g0/0 (say not a network)
no auto-summary         --Disables automatic classful summarization of routes
network <network ID(1) (classful)> --include net(1) to rip routing
network <network ID(2) (classful)> --include net(2) to rip routing

to create a a default route:

ip route 0.0.0.0 0.0.0.0 <interface / ip address>  --create a static default route

router rip
default-information originate

OSPF Routing:

Definitions:
  • Select paths using:
    • Sum of Costs
    • Lowest cost wins
    • Dijkstra’s algorithm
  • Cost Calculation:
    • Serial = 64
    • Ethernet = 10
    • Fast Ethernet = 1
  • Process ID: A positive integer that lets us differentiate different active OSPF routing in the same router.
  • Router ID: Represented in IPv4, It uniquely identifies a router within an OSPF domain.
  • Wildcard mask: the complement of the subnet mask, used to select which interface participate in OSPF.
  • Area ID: Lets us divide large networks into smaller ones. (all other areas should be connected to AREA 0).
  • Passive interface: Stops the router from forming neighbor relationships on that link.
Commands:
router ospf <precess ID>
router-id <router ID>
passive-interface <interface>
network <network ID> <wildcard mask> area <area nb>