side_notes
There is confusion between:

  1. IP protocol
  2. IP address

IP address:

  • The IP address is an identifier (ID).
  • It can be either public or private
  • It is assigned to a network interface (NOT the device as a whole)

How to read:

Example: 192.168.1.34/24
Each octet is a number from 0 to 255.

  1. We read the prefix length (after the /).
    get the 8th root of the number. The result will be the length of the network address
    example: (24)^(1/8) = 3 => making the first 3 octets for the network address.

  2. The remaining octet(s) is the device’s(host)

The router ignores the host part; it forward packets based on : **192.168.1.0/24**
“To reach any device in 192.168.1.x, send packets this way.”

  • **Special addresses (in a /24 network):
AddressMeaning
192.168.1.0Network ID (not a device)
192.168.1.255Broadcast
192.168.1.1Often the router
192.168.1.34A host
An IP address is a logical location: the prefix identifies the network, and the remaining bits identify the device inside that network.

IP protocol:

  • The IP protocol wraps data into IP packets.
  • IP is NOT a packet, IP create packets.

We say that IP is packet-based because:

  • Does not maintain connections
  • Sends independent packets
  • Each packet is routed separately
    This is called connectionless networking